EK125HH

Hydraulic Hammer

The EK125HH

TECHNICAL SPECIFICATIONS

Standard Chassis: Cat® 323 Next Gen  
Installed Power: 164 hp 122 kW
Maximum Torque: 101,700 ft.lbs 14,000 kg.m
Maximum Diameter: 2 ft 8 in 800 mm
Drilling Depth (Auger Only): 57 ft 17,390 mm
Maximum Drilling Depth: 77 ft 23,390 mm
Maximum Extraction Force: 101,600 lbf 46,100 kgf
Minimum Transport Weight: 75,400 lb 34,400 kg
Standard Operation Weight: 90,000 lb 41,000 kg
Learn More

About the EK125HH

The EK125HH from CZM Foundation Equipment is a hydraulic pile drive machine mounted on a Cat® 323 Next Gen base and equipped with a free fall hydraulic impact hammer. This free fall feature has multiple advantages:

  • Half the life cycle is maintenance-free because it’s operated by gravity
  • Less fuel consumption due to lower installed power
  • No need for impact reaction absorption by the hydraulic circuit when ram hits the pile mean a much higher durability and the ability to work with any kind of bearing capacity and/or refusal specification
  • Improved rate ratio between piston weight and total hammer weight with higher efficiency compared to similar sized machines
 

Another important feature of the CZM hammer is the use of two external hydraulic cylinders which lift the ram up to the controlled height, making it quick and easy to visually inspect and access for maintenance.

EK125HH is a compact machine with quick setup for operation and transport mode. In addition in it a single-load piece of equipment. The 360º of swing and its parallelogram allows for agility in the pile location and the ability to work with very tight access.

The computer in the cabin controls a precise drop height and driving frequency on the already renowned high energy transfer efficiency of this kind of hammer.

Video Tour

EK125HH

EK125HH

Technical Drawings

EK125HH

Photo Gallery

CZM USA is a specialized foundation equipment manufacturer headquartered in Savannah, GA.

© 2020 All rights reserved.

Scroll to top