Displacement Pile Rigs 

Learn About

Displacement Pile

Displacement piles are a single pass method similar to CFA, but no soil spoils are removed. Instead of removing the soil while drilling, the displacement pile tool is designed to push the soil, densifying it, and consequently increasing the skin friction of the pile. During the grouting phase, concrete is pumped through the auger simultaneously with the extraction of the auger from the ground, while the concrete flow and pressure is being monitored by a computer. Typical diameters vary from 12in to 24in, to a maximum depth of 110ft. Usually larger machines are required when compared to CFA as this technique requires more torque and crowd force to drill. If you have any questions about these displacement pile rigs , please contact us at 912.200.7654 and we will be happy to help!

EK300LS
Standard Chassis: CAT 352 Tier IV
Installed Power: 432 hp 322 kW
Maximum Torque: 252,000 ft.lbs 35,000 kg.m
Maximum Diameter: 24 in 620 mm
Maximum Drilling Depth: 93 ft 28,500 mm
Operation Weight 230,000 lb 104,500 kg
EK260LS
Standard Chassis: CAT 352 Next Gen
Installed Power: 432 hp 323 kW
Maximum Torque: 209,700 ft.lbs 28,445 kg.m
Maximum Diameter: 24 in 620 mm
Maximum Depth: 87 ft 26,500 mm
Operation Weight 200,000 lb 90,900 kg
EK240LS with auger
Standard Chassis: CAT 336 Next Gen
Installed Power: 323 hp 242 kW
Maximum Torque: 193,230 ft.lbs 26,200 kg.m
Maximum Diameter: 24 in 620 mm
Maximum Drilling Depth: 93 ft 28,500 mm
Operation Weight 180,000 lb 81,800 kg
EK160LS at Factory
Standard Chassis: CAT 330 Next Gen
Installed Power: 275 hp 205 kW
Maximum Torque: 134,300 ft.lbs 18,620 kg.m
Maximum Diameter: 20 in 510 mm
Maximum Depth: 67 ft 20,300 mm
Operation Weight 115,000 lb 52,250 kg

CZM USA is a specialized foundation equipment manufacturer headquartered in Savannah, GA.

© 2020 All rights reserved.

Scroll to top